The NOAH story seen through Peroni's eyes
It is quite counterintuitive to choose a difficult problem to solve and dedicate your life to finding the solution. And yet, there are two young people who have made this a way of life and a design business. The passion required for such an undertaking is directly proportional to the complexity of the problem. And when you have to work with wood at the micron level, things are extremely complex. Iosif Harasemiuc and Ruben Perju are two graduates from Cluj, one in architecture and the other in engineering, who decided to dedicate their time and vital energies to designing and creating wristwatches from padauk, purpleheart, or snake wood.

Peroni Nastro Azzurro: Why did you choose to make wooden watches?
NOAH: Because it is a challenge: it is very difficult to make a wooden watch. In addition, wood is a spectacular material. For example, there is a wood called Purpleheart that is purple. Padauk is an orange African wood that turns red over time. Snake Wood has spots. There are a few wood essences on this earth that leave you breathless.
Peroni Nastro Azzurro: How much freedom do you have in watch design?
NOAH: We had a great, immense inspiration in NOT studying competitors when we started designing these watches. Ruben is an architect, I am an engineer. We put our minds together and it worked. Besides the ones we manufacture, we have many designs in the drawing stage. We will see which ones will work and which ones we will implement.
Peroni Nastro Azzurro: When did you sell the first NOAH watch?
NOAH: On May 24, 2015. It happened at a Romanian design fair, Made in RO. Unfortunately, I cannot remember who our first customer was because I was extremely emotional and excited. After three years of sustained work, research, and design, we had sold our first product! All our watches have a serial number. That was watch number 1, a watch of great sentimental value looking back. Later, we received a watch from the same batch at the service center and stopped it – we made the customer a new watch instead.
Peroni Nastro Azzurro: Technically, is there any difference between the first generation and what you have now?
NOAH: Yes, we periodically upgrade the technical solutions. Visually, the current ones look approximately the same as the first models, but inside they are very different. In almost two years, we have gone through 10 such generations of NOAH watches, which have become increasingly resistant, water-resistant, etc. The optimization process is very dynamic.
Peroni Nastro Azzurro: What mechanism is in NOAH watches?
NOAH: Now we have a quartz mechanism because we wanted the watches not to exceed 25 grams. At the moment, two other mechanisms are in development, one of which is the first Romanian automatic mechanism. We are working with a company in Switzerland that produces the mechanisms and with Claudiu Burlan from Arad, probably the best watchmaker in Romania. The man is a third-generation watchmaker, and when I went to him, he had about three watches worth over 200,000 euros in maintenance. He is the first watchmaker with a safe that I have seen (laughs).
Peroni Nastro Azzurro: Is the wood you use special?
NOAH: We bring pieces of wood from all over the world. We need very hard essences. We use, for example, Lignum Vitae, the third hardest wood in the world. To give you an idea of how hard it is, the hardest wood in our country is oak, with 600 points on the hardness scale. Lignum Vitae has 4000. The “weakest” wood we use has 1500, so almost three times harder than oak. We buy very small pieces, from which we make 2-3 watches. We do not take a piece of wood until we are convinced that it is close to perfection, that it has no holes or knots, that the fibers are healthy, etc. A piece of Royal White ebony can cost 150 euros. If I go to a lumber importer, he says I am crazy. Spectacular wood is rare and expensive.
Peroni Nastro Azzurro: What happens next?
NOAH: The wood that comes from across the seas and lands is prepared to become a watch. First, it is injected with a special cactus resin under vacuum, where all the air is extracted from the fiber. Then, the wood is put in the oven and stabilized, and only then do we start working on it with the CNC and then manually.
Peroni Nastro Azzurro: Where do the straps come from?
NOAH: We bring the straps from Italy. The Italians are by far the best in leatherworking. The company we work with has about 100 years of tradition in this field, and it can be seen from afar. This Italian company was founded after World War I, somewhere near Venice, and now they are present in over 45 countries.
Peroni Nastro Azzurro: How far can the customization of a watch go?
NOAH: You have exactly 7400 possible combinations available for each model (laughs). You can choose the exterior essence, the case, the interior, the dial, the hands, the seconds, the strap, you can add text or a logo on the back. Also, the box can come in four different wood essences, and things can be engraved on it.
Peroni Nastro Azzurro: Who are NOAH customers?
NOAH: We made such a portrait and the following emerged: our customer is very educated, has a salary far above average, and a passion for design and for Beauty. For example, one of our customers is Omer Tetik, CEO at Banca Transilvania. This year we are taking NOAH watches outside the country's borders and we will attack the European market. We will go to study the market at Basel World and at several international design fairs.
Peroni Nastro Azzurro: What is the price range for a NOAH watch?
NOAH: Prices start at 900 lei and can reach 1600 lei using our configurator on the site. More special requirements cost extra (very tight delivery times, unique materials, etc.). The most expensive watch can reach 2500 lei. We have sold about 1200 watches since we started, and the trend is growing. Until two or three months ago we did not have a website and we sold exclusively on a Facebook page.
Peroni Nastro Azzurro: Who are the manufacturers you are competing with?
NOAH: We, theoretically, are in competition with any watch manufacturer. Practically, we are in competition with those who make wooden watches. On a global level, there are about five players we analyze. The biggest are Wewood, then those from Jord watches make fairly complex things, Tense are some old Canadians in the field and the last ones on the list are Plantwear. Compared to all these competitors, we have a one-piece case. We have no metal-leather contact. Our materials are super premium (wood, sapphire crystal, Italian strap). The weight of our watches is the smallest on the market, and that means the watch is very comfortable. In addition, our watches can be configured in extremely many combinations.
Peroni Nastro Azzurro: What would NOAH watches look like if you customized them for yourselves?
NOAH: Ruben would make an all black: ebony on the outside with ebony on the inside with a black or orange strap and I, Iosif, would go for padauk wood with ebony and a black strap without stitching.
Article taken from https://peroniitaly.ro/noah-ceasuri-din-lemn-made-in-romania/




